intellifet is a registered trademark of diodes incorporated. ZXMS6002GQ document number: ds33606 rev. 1 - 2 1 of 9 www.diodes.com april 2014 ? diodes incorporated ZXMS6002GQ advance information 60v n-channel self protected enhancement mode intellifet ? mosfet with status indication product summary ? continuous drain source voltage v ds = 60v ? on-state resistance 500m ? ? nominal load current (v in = 5v) 1.4a ? clamping energy 550mj description self protected low side mosfet. m onolithic over temperature, over current, over voltage (active clam p) and esd protected logic level functionality. intended as a general purpose switch, with status indication and programmable current limit. applications ? especially suited for loads with a high in-rush current such as lamps and motors ? all types of resistive, induc tive and capacitive loads in switching applications ? c compatible power switch for 12v and 24v dc applications ? automotive rated ? replaces electromechanical relays and discrete circuits ? linear mode capability - the curr ent-limiting protection circuitry is designed to de-activate at low v ds , in order not to compromise the load current during normal operation. the design max. dc operating current is therefore determined by the thermal capability of the package/board combination, rather than by the protection circuitry. ? note: this does not compromise the product's ability to self- protect during short-circuit load conditions. ? status pin voltage reflects the gate drive being applied internally to the power mosfet. ? with v in = 5v: ? status voltage ~ 5v indicates normal operation ? status voltage ~ (2-3)v indicates that the device is in current-limiting mode ? status voltage < 1v indicates that the device is in thermal shutdown features and benefits ? status pin (analog status indication) ? logic level input ? short circuit protection with auto restart ? over voltage protection (active clamp) ? thermal shutdown with auto restart ? over-current protection ? input protection (esd) ? load dump protection (actively protects load) ? high continuous current rating ? lead-free finish; rohs compliant (note 1 & 2) ? halogen and antimony free. ?green? device (note 3) ? qualified to aec-q101 standards for high reliability ? ppap capable (note 4) mechanical data ? case: sot-223 ? case material: molded plasti c, ?green? molding compound ? ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: matte tin finish ? weight: 0.112 grams (approximate) note: the tab is connected to the drain pin and must be electrically isolated from the source pin. connection of significant copper to the tab is recommended for best thermal performance. ordering information product marking reel size (inches) tape width (mm) quantity per reel ZXMS6002GQta zxms6002 7 12 1,000 units notes: 1. eu directive 2002/95/ec (rohs) & 2011/65/eu (rohs 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4. automotive products are aec-q101 qualified and are ppap capabl e. automotive, aec-q101 and standard products are electrically and thermally the same, except where specified. for more information, please refer to http://www.diodes.com/quality/product_compliance_de finitions/. 5. for packaging details, go to our website at http://www.diodes.com/p roducts/packages.html. top view sot-223 top view pin out
intellifet is a registered trademark of diodes incorporated. ZXMS6002GQ document number: ds33606 rev. 1 - 2 2 of 9 www.diodes.com april 2014 ? diodes incorporated ZXMS6002GQ advance information marking information functional block diagram zxms 6002 zxms6002 = product type marking code
intellifet is a registered trademark of diodes incorporated. ZXMS6002GQ document number: ds33606 rev. 1 - 2 3 of 9 www.diodes.com april 2014 ? diodes incorporated ZXMS6002GQ advance information absolute maximum ratings (@t amb = +25c, unless otherwise stated.) parameter symbol limit unit continuous drain-source voltage v ds 60 v drain-source voltage for short circuit protection v in = 5v v ds(sc) 36 v drain-source voltage for short circuit protection v in = 10v v ds(sc) 20 v continuous input voltage v in -0.2 to +10 v peak input voltage v in -0.2 to +20 v operating temperature range t j , -40 to +150 ? c storage temperature range t stg -55 to +150 ? c power dissipation at t amb = +25 ? c (note 6) p d 2.5 w continuous drain current @ v in =10v; t amb = +25 ? c (note 6) i d 1.6 a continuous drain current @ v in =5v; t amb = +25 ? c (note 6) i d 1.4 a continuous source current (body diode) (note 6) i s 3 a pulsed source current (body diode) (note 7) i s 4.7 a unclamped single pulse inductive energy e as 550 mj load dump protection v loaddump 80 v electrostatic discharge (human body model) v esd 4000 v din humidity category, din 40 040 ? e ? iec climatic category, din iec 68-1 ? 40/150/56 ?
intellifet is a registered trademark of diodes incorporated. ZXMS6002GQ document number: ds33606 rev. 1 - 2 4 of 9 www.diodes.com april 2014 ? diodes incorporated ZXMS6002GQ advance information thermal resistance (@t amb = +25c, unless otherwise stated.) parameter symbol value unit junction to ambient r ja 50 ? c/w junction to ambient r ja 28 ? c/w notes: 6. for a device surface mounted on 50mm x 50mm x 1.6mm fr4 board with a high coverage of single sided 2oz weight coppe r. 7. for a device surface mounted on fr4 board and measured at t<=10s. thermal characteristics
intellifet is a registered trademark of diodes incorporated. ZXMS6002GQ document number: ds33606 rev. 1 - 2 5 of 9 www.diodes.com april 2014 ? diodes incorporated ZXMS6002GQ advance information electrical characteristics (@t amb = +25c, unless otherwise stated.) parameter symbol min typ max unit conditions static characteristics drain-source clamp voltage v ds(az) 60 70 75 v i d = 10ma off state drain current i dss ? 0.1 3 a v ds = 12v, v in = 0v off state drain current i dss ? 3 15 a v ds = 32v, v in = 0v input threshold voltage (note 8) v in(th) 1 2.1 ? v v ds = v gs , i d = 1ma input current i in ? 0.7 1.2 ma v in = +5v input current i in ? 1.5 2.7 ma v in = +7v input current i in ? 4 7 ma v in = +10v static drain-source on-state resistance r ds(on) ? 520 675 m ? v in = 5v, i d = 0.7a static drain-source on-state resistance r ds(on) ? 385 500 m ? v in = 10v, i d = 0.7a current limit (note 9) i d(lim) 0.7 1.0 1.5 a v in = 5v, v ds > 5v current limit (note 9) i d(lim) 1 1.8 2.3 a v in = 10v, v ds > 5v dynamic characteristics turn-on time (v in to 90% i d ) t on ? 3 10 s r l = 22ohm, v in = 0 to 10v, v dd = 12v turn-off time (v in to 90% i d ) t off ? 13 20 s r l = 22ohm, v in = 10v to 0v, v dd = 12v slew rate on (70 to 50% v dd ) -dv ds /dt on ? 8 20 v/ s r l = 22ohm, v in = 0 to 10v, v dd = 12v slew rate off (50 to 70% v dd ) dv ds /dt on ? 3.2 10 v/ s r l = 22ohm, v in = 10v to 0v, v dd = 12v notes: 8. protection features may operate outside spec for v in < 4.5v 9. the drain current is limited to a reduced value when v ds exceeds a safe level.
intellifet is a registered trademark of diodes incorporated. ZXMS6002GQ document number: ds33606 rev. 1 - 2 6 of 9 www.diodes.com april 2014 ? diodes incorporated ZXMS6002GQ advance information electrical characteristics - continued (@t amb = +25c, unless otherwise specified.) parameter symbol min typ max unit conditions protection functions (note 10) required input voltage for over temperature protection v prot 4.5 ? ? v ? thermal overload trip temperature t jt +150 +175 ? ? c ? thermal hysteresis ? ? +1 ? ? c ? unclamped single pulse inductive energy t j = +25 ? c e as 550 ? ? mj i d(iso) = 0.7a, v dd = 32v unclamped single pulse inductive energy t j = +150 ? c e as 200 ? ? mj i d(iso) = 0.7a, v dd = 32v status flag normal operation v status ? 4.95 ? v v in = 5v current limit operating v status ? 2.5 ? v v in = 5v thermal shutdown activated v status ? 0.2 1 v v in = 5v normal operation v status ? 8 ? v v in = 10v current limit operation v status ? 3 ? v v in = 10v thermal shutdown activated v status ? 0.35 1 v v in = 10v inverse diode source drain voltage v sd ? ? 1 v v in = 0v, -i d = 1.4a, note: 10. integrated protection functions are designed to prevent ic destruction under fault conditions described in the datasheet. fault conditions are considered as "outside" normal operating range. protection functions are not designed for continuous, repetitive operation.
intellifet is a registered trademark of diodes incorporated. ZXMS6002GQ document number: ds33606 rev. 1 - 2 7 of 9 www.diodes.com april 2014 ? diodes incorporated ZXMS6002GQ advance information typical characteristics
intellifet is a registered trademark of diodes incorporated. ZXMS6002GQ document number: ds33606 rev. 1 - 2 8 of 9 www.diodes.com april 2014 ? diodes incorporated ZXMS6002GQ advance information package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. note: controlling dimensions are in millimeters. approxim ate dimensions are provided in inches. suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. a1 a 7 7 d b e e1 b1 c e1 l 0 - 1 0 q e 0.25 seating plane gauge plane sot223 dim min max typ a 1.55 1.65 1.60 a1 0.010 0.15 0.05 b 0.60 0.80 0.70 b1 2.90 3.10 3.00 c 0.20 0.30 0.25 d 6.45 6.55 6.50 e 3.45 3.55 3.50 e1 6.90 7.10 7.00 e - - 4.60 e1 - - 2.30 l 0.85 1.05 0.95 q 0.84 0.94 0.89 all dimensions in mm dimensions value (in mm) x1 3.3 x2 1.2 y1 1.6 y2 1.6 c1 6.4 c2 2.3 x2 c1 c2 x1 y2 y1
intellifet is a registered trademark of diodes incorporated. ZXMS6002GQ document number: ds33606 rev. 1 - 2 9 of 9 www.diodes.com april 2014 ? diodes incorporated ZXMS6002GQ advance information important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2014, diodes incorporated www.diodes.com
|
